Sunday 20 December 2009

EDI INVOICE

InterCompany Billing IDoc

EDI

Advanced Guide to Edi Configuration

ERS Settings Required

In the vendor master, make sure the 3 ERS boxes are checked off in the
purchasing data section: GR-based inv verif, AutoEvalGRSetmt Del, &
AutoEvalGRSetmt Ret.

In the PO, make sure the following boxes are checked off: GR, IR,
GR-basedIV, & ERS. GR-basedIV has to be checked off in order for the ERS
program to create the invoice.

In the info record, check off GR-basedIV.

Yes, you need to set up message output but you don't need to print the
output. We set it up for company code and not by vendor and company code.
We set it up with a dispatch time of 3 so it won't print unless we do an
explicit request.

When we have a 102 movement, ERS creates a credit memo when the ERS program
is run.

ERS Invoice Posted 2 times. How to prevent it

Our config is OK, we have "check double invoice on" and zero tolerance. The
root cause of the problem is deeper than that.

Table EKRS stores ERS items which have been goods receipted and are to be
invoiced.

When an ERS is run it reads table EKRS to see what to invoice but does not
lock the items to be processed.

Therefore, if another ERS starts with overlapping selections ( as in my case
)while the first one is still running everything gets posted twice. As the
performance of ERS (or any SAP transaction involving purchasing documents
with history) is so appalling this can easily happen.

OSS note 175827 explains the cause and offers the helpful advice "make sure
you don't run two at once" i.e. make sure your users never make mistakes.
SAP never make mistakes so they have little tolerance for those of us that
do.

Note 216997 gives you a little program to see how many items got posted
twice.

Another note explains that if you try to manually reverse items posted twice
and accidentally put a wrong number in and reverse one only posted once it
has all sorts of dire consequences most notably that EKRS does not get
updated so you can't re-invoice it again.

None of the notes actually offer a solution. In the 564 "program error" OSS
notes relating to ERS I noticed references to user exits. I am going to see
if I can use one of those to lock the relevant EKRS entries for a running
ERS job.

Saturday 19 December 2009

Valuation and Account Assignment

Account / Transaction key for Services

I am maintaining a condition for services. IMG MM - External Services Management -> Maintain Condition for services . Here i have created condition type and maintained in conditions: Schemas for services. But i cannot create Account key / Transaction key here. Can anyone guide me where i can create account / transaction key for external service management.

 

Account / Transaction key can be maintained for normal PO conditions in IMG MM -> Purchasing -> Conditions -> Price Determination but those account keys are not appearing in External Service Management calculation schema for services.

 

 

You can Maintain a transaction event key in T687 table

 

Using OMGH the transaction key can be maintained but it doesnt appears in Service Management calculation schema.

 

Using SM30 V_T687 transaction key is maintained and it is accepted in Service Management caculation schem but now i have to assign GL accoutn to it.

 

Release Strategy


Release Strategy - Details about Characteristics -

Tuesday 15 December 2009

How to add an attachment to a Purchase Order in SAP?

You can attach manually any document to PO without using Document Management System ( DMS ) in SAP 4.6C.

But you cannot attach document while you create PO in T/Code ME21N 
Save you PO ( ME21N ) and again open with change ( ME22N ) then you can attach document through Service for Object button. Service for Object button available down side of Command screen ( in your PO screen ME22N ) 
Click your Service Object button -> Create -> Create attachment 
then select your window directory ( which file you need to attach) select your file Now your system shows message  Service "Create attachment" is started. 
Save again your PO. You can see (open) your attachment in same field ( Service for Object ) select and Create and check attachment list. You can attach as many document in your PO.

Note: This is only information for internal or you can print separately this document for sending to vendor ( fax ) System will not print automatically along PO print out.

How to deactivate ERS output??

 

Please refer to the column Information Text, which is stated that " ...

No message was found for....". Please double click on this for further

information about this and the error message should be M8 446:

 

You can change the attribute of the message thru path in customizing :

Materials Management, Logistic Invoice Verification => Define

attributes of Systems Messages'. Here you can use the pull down menu

and set the message to "switch off message" this can be set up for

individual users or for all users.

 

In this step, you can define the category of message received by

individual users for certain messages in Invoice Verification. This

allows you determine whether a user receives a message as an indication

of:

- Information

- Warning

- Error

- Or whether no message should be issued at all: message switched off

 

SAP Germany office - Photos by my friend Jan Schmucker

SAP Germany By Jan Schmucker

Wednesday 9 December 2009

MM Book

Sap Mm Functionality Technical

Address Number and Address

Maintain Addresses >> tcode >> MEAN
Table for Addresses >> ADRC

WE CAN SEE THIS IN MENU TREE IN MASTER and under MESSAGES

Table TWLAD has the address number for the storage location.

In our PO SAPscript, it picks the Storage location address over division address.

when you create a PO make sure you maintain both the plant and the storage location and the delivery address of the storage locations should come instead of the plant delivery address.

==============================================

Addresses in Purchasing Linked to Central SAP Address Management

Description
As of Release 4.0A, all addresses needed in purchasing documents (e.g. vendor address and delivery address) are administered using the central address management functionality of the SAP System.

As a result, you can store more data than previously in all purchasing documents (e.g. several telephone and fax numbers, e-mail addresses, or information on districts or parts of building complexes).

Storage location address

You now have the option of storing one or more addresses for the level of the storage location too. If you maintain addresses for storage locations, the latter are suggested by the system as the delivery address (i.e. they appear as default values) when a purchase order is created.

When searching for the default address, the system proceeds as follows:


If just one storage location address has been maintained, it is taken as the default address

If no storage location address has been maintained, the plant address is taken as the default address.

If several storage location addresses have been maintained, the first of them is taken as the default address.

A new user exit (EXIT_SAPLMMDA_001) is available for the purpose of differentiated selection, allowing you to specify yourself (if desired) which address you wish to use.

Delivery address in the purchase requisition

As of Release 4.0A, you can maintain a delivery address for each item of a purchase requisition. There are three alternative ways of doing this:


Manual maintenance

Selection of an address from the central address management facility
(in the Purchasing menu under "Master data -> Delivery addresses")

Entry of a vendor or customer number, on the basis of which the system derives the relevant address.
Vendor address in purchasing documents

One-time vendors are also included in the central address management facility.

Previously, vendor addresses were only displayed in purchasing documents. As of 4.0A they can also be changed.

Change system parameters in customizing

User exit EXIT_SAPLMMDA_001:

A communication structure is passed on to the user exit. You can extend the former.

For example, if you wish to determine that materials of the group "Construction materials" are to be delivered to a particular location, you must include the field "Material group" in the communication structure.

For more on this topic, please also refer to the release note
Changes in Address Management.

Sunday 6 December 2009

REQUIREMENTS FOR CONDITIONS

VOFM Maintain Requirements and Functions (output requirements, pricing formulas, etc)

MAINTENANCE VIEW FOR TABLE

Goto SE11,
enter your table name.
Then goto Utilities\TableMaintenance Generator double click on the textbox of Overview screen.
Just wait and the layout editor will be open.
make any changes in the column names or width.

or

Go to SE55 click on change button or in SE11-> utilities->maintenance. Click on "Expert mode". Leave the first two check box that is Include renew. Tick rest check box and press enter. It will regenerate you maintenance screen.

Friday 4 December 2009

Breaking Into SAP modules explained

Sending P.O. By Mail To Vendor

Is there any standard programm for sending P.O.'s by e-mail to vendor's email-id?

You need to do some configuration for this.

- Goto NACE .
- Select EF and click on OUTPUT TYPES.
- Then select Output Type NEU and click on processing routines .
- In that you have to add a new entry - medium 5 .
- Then you need to assign a program, form routine and form.
- You can use the standard program i.e. SAPFM06P, FORM routine is always ENTRY_NEU and standard MEDRUCK.
- Then in PARTNER FUNCTION you need to add a new entry : medium - 5 and function - VN .
- For subject of the mail goto Mail Title and Texts. In title give PO No. &EKKO-EBELN& .
- Under General data -> Replacement of text symbols give programm as SAPMM06E and Form Routine as
TEXT_SYMBOL_REPLACE .
- Now the subject will be PO No. 1800004202.
- You need to maintain your email id in tcode SU01 and also the vendor's email id.
- Now while creating a new purchase order , change the medium to External Send .
- Then goto Communication Method and select CS01 . ALSO make sure that the Cover Page Text has value PO No. &EKKO-EBELN& .
- Goto tcode ME9F .
- Execute.
- Select the checkbox and click on Output Message.
- You will get a message MAII 00000000000001 generated .

If the BASIS guys have made the necessary configuration for sending mail then the mail will go .

You can see the status in tcode SOST.

If you want to use a z-programm and z-form then you need add the functions used in standard programm SAPFM06P for generating mail in your z-programm.

ERS


Logistics Invoice Verification ERS -

PR Release Strategy


548510-SAP-Release-Strategy -

PR Release Strategy


Step-by-step-guide-of-SAP-PR-Release-Strategy-configuration-a-case-study -